TRAFFIC SIGNS
TO VIEW ANY PDF DRAWING, SIMPLY CLICK THE APPROPRIATE DRAWING NUMBER.
| Drawing Number | Description |
|---|---|
| SD/12/1 | Sign Post and Foundations - Notes |
| SD/12/2 |
Typical Sign Assemblies (Lateral Clearances and Mounting Heights)
|
| SD/12/3 | Sign Assemblies – Dos and Don’ts (Part 1) |
| SD/12/4 | Sign Assemblies – Dos and Don’ts (Part 2) |
| SD/12/5 | Sign Assemblies – Dos and Don’ts (Part 3) |
| SD/12/6 | Sign Assemblies – Dos and Don’ts (Part 4) |
| SD/12/7 | Drawing not allocated |
| SD/12/8A | Post Details and Foundations – Sign Areas upto 3m2 |
| SD/12/9A | Post Details and Foundations – Sign Areas 3.01m2 to 9m2 |
| SD/12/10 | Drawing not allocated |
| SD/12/11 | Drawing not allocated |
| SD/12/12 | Drawing not allocated |
| SD/12/13 | Concrete Base for Large Direction Signs |
| SD/12/14 | Tubular steel large based traffic sign post |
| SD/12/15 | Concrete Foundation for Straight and Large Base Traffic Sign Posts |
| SD/12/16 | Stiffening of Standard Traffic Signs |
| SD/12/17 | Flap Type Signs |
| SD/12/18 | Drawing not allocated |
| SD/12/19c | Base Illuminated Deformable Bollard – Type A |
| SD/12/20c | Base Illuminated Deformable Bollard – Type B |
| SD/12/21B | Sign Light Unit Detail |
| SD/12/22 | Offset Brackets |
| SD/12/23 | Drawing not allocated |
| SD/12/24 | Fingerpost Sign (Using Offset Brackets and Uni-clips) |
| SD/12/25 | Fingerpost Finial (Ball Design) |
| SD/12/26 | Sign Mounted to Gantry on I Section Supports |
| SD/12/27 |
Plank Type Construction for Direction Signs Exceeding 4.5m Wide
|
| SD/12/28 |
Footpath/Bridleway/Byway Fingerpost Sign (Using Off-set Brackets and Uni-clips)
|
| SD/12/29 | Drawing not allocated |
| SD/12/30 | Installation of Traffic Signals – Ducting Details |
| SD/12/31 | Installation of Traffic Signals – Inspection Chamber B |
| SD/12/32 | Installation of Traffic Signals – Inspection Chambers Type A and Type AA |
| SD/12/33A | Installation of Traffic Signals – Signal Poles, Controllers and Feeder Pillars |
| SD/12/34 | 7m Signal Tall Pole – Foundation Details |
| SD/12/35 | Pole Socket/Pole Setting-out Details |
| SD/12/36B | Numbering System for Street Lighting and Illuminated Signs |
| SD/12/37 | Drawing not allocated |
| SD/12/38 | Drawing not allocated |
| SD/12/39A | Flexible bollard - non illuminated & solar powered |
| SD/12/40 | Base Light Unit for Chevroflex Sign System |
| SD/12/41 | Illuminated Sign – School Crossing Signal Assembly |
| SD/12/42B | Belisha Beacon and Refuge Beacon |
| SD/12/43A | Numbering System for Illuminated Bollards |
| SD/12/44 | Isolator Warning Notice |
| SD/12/45 | Drawing not allocated |
| SD/12/46 | Signs on Contract Vehicles |
| SD/12/47A |
Teeth Markings for Speed Reduction Sites With Gateway Markings
|
| SD/12/48A |
Teeth Markings for Speed Reduction Sites Without Gateway Markings
|
Page Last Updated: 22 March 2011
